Model configured to use Badger SLAM mount brass catcher on side as shown.
this allows brass catcher to mount on side of rifle. Other RAS systems may be compatible. Email us with questions.
Badger SLAM mount will require free space somewhere between 3/4" to 5 1/2" along the top rail on EBR chassis.
depending on where customer specifies will dictate the side mount hardware on brass catcher. 3/4" to 2 1/4" = STD length, 2 1/4" to 3 3/4" = MID length hardware.
Available with twist tight or throw lever mount.
Badger SLAM mount not included.
Low profile top mounting system does not block open sites.
**Must have stripper clip guide installed for proper ejection pattern compatability.
Twist tight Mount is screw tightened using 9/64 bit at 25 in/lbs.
Capacity is 75 - .308/7.62 cases.
Basket will pivot out of the way when charging handle access is needed.
Allows access to chamber area by simply pivoting the basket one position away from receiver.
Basket is vented to allow gases to escape away from shooter.
Basket/bag can be folded up to save space during storage and even left on the rifle if desired.
Coming soon. email us to be notified when available or more information.